RESUMO
In gold-smelting wastewater after the original treatment process of flocculation and precipitation using mainly lime, a mixture of As, Cu, Pb, Mn, Zn, Al, Ni, and Fe existed with an arsenic concentration of 813.07 mg/L and other ions' concentration at ug/L levels. In this work, a new clean process of mainly adsorption with self-made adsorbent Fe-PE, which was synthesized by loading ferric lignin on agricultural mulch film residual, was investigated to purify and remove arsenic from gold-smelting wastewater. A batch of column experiments was investigated to explore the reaction behavior between wastewater and adsorbent Fe-PE. The results showed while operating the adsorption columns at a pilot scale for 68 days, the arsenic concentration in the effluent was below 0.5 mg/L, and there was no significant change in the concentration of co-existing metal ions, indicating that Fe-PE had a good selective adsorption performance for arsenic in wastewater. Furthermore, Fe-PE did not dissolve and release Fe ions in wastewater, and the whole process could not produce sludge. This work first suggested an efficient and potential application for the purification and removal of arsenic from gold-smelting wastewater with agricultural mulch film residual after chemical modification, which will provide a novel strategy for reusing the agricultural mulch film residual.
RESUMO
This work developed a composite (Pe-FeLs) which loaded ferric lignin on polyethylene film (PE film) by chemical modification and physico-chemically characterized by Microscope, FESEM with elemental mapping analysis, and XRD. Microscope pictures showed that chemical modification did not destroy the appearance of PE film. The FESEM images of Pe-FeLs showed the well-distributed clusters could be clearly seen and most of the particles were spherical morphology. Elemental mapping of individual element on Pe-FeLs clearly indicated the existing of iron. The XRD pattern showed the amorphous hydroxides of iron on Pe-FeLs. In arsenic solution, the total arsenic adsorption capacity of Pe-FeLs was much higher than that of ferric lignin and PE, which showed Pe-FeLs had the ability to adsorb arsenic. For making Pe-FeLs work well in the soil, a Pe-FeLs system was set up with plastic grid plate, PE film with holes, Pe-FeLs, PE film, and plastic grid plate from the upper to bottom in order. With applying Pe-FeLs system under the soil, arsenic was significantly reduced by 25.5 ~ 53.4% in heavily, moderately, and lower arsenic-polluted soils, the biomass of the romaine lettuce increased and arsenic accumulation in the romaine lettuce decreased.
